HP ESG Series - Help Mode Single Cont; Hp8648 A;B;C;D

5-176
Hardkey and Softkey Reference
Utility
Help Mode Single Cont
This softkey toggles the help mode between single and continuous. In single
mode, when you press the
Help key, help text is provided for the next front panel
hardkey or softkey that you press. Your next key press returns you to normal
operation. In continuous mode, when you press the
Help key, help text is provided
for the next front panel hardkey or softkey that you press and that key’s function is
also executed. You will stay in this help mode until you press the
Help key again.
Help mode is a persistent state; it is not affected by an instrument preset or by a
power cycle.
Softkey Location: Press
Utility, Instrument Info/Help Mode, Help Mode Single Cont
SCPI Commands:
:SYSTem:HELP:MODE SINGle|CONTinuous
:SYSTem:HELP:MODE?
HP8648A/B/C/D
This softkey is one of the choices in both the Preset Language menu and the
Remote Language menu. The
HP8648A/B/C/D softkey is a language choice for the
signal generator that is compatible with the remote language commands used by
the HP 8648A/B/C/D. Choosing
HP8648A/B/C/D in the Preset Language menu
allows you to select this remote language as the default after a normal preset.
Choosing
HP8648A/B/C/D in the Remote Language menu allows you to
immediately change the signal generator to use this remote language.
Softkey Location: Press
Utility, Power On/Preset, Preset Language, HP8648A/B/C/D
or press
Utility, HP-IB/RS-232, Remote Language, HP8648A/B/C/D
SCPI Commands:
:SYSTem:LANGuage “HP8648”
:SYSTem:LANGuage?
:SYSTem:PRESet:LANGuage “HP8648”
:SYSTem:PRESet:LANGuage?