3-50
Troubleshooting
Returning Your Signal Generator to HP
Returning Your Signal Generator to HP
If you are returning your signal generator to HP for servicing, fill out and attach a
blue repair tag to the instrument. Repair tags are located at the end of this chapter.
Include as much information as possible about the problem: record any error
messages that appeared on the display, and include performance test results or any
other specific data on the performance of the signal generator.
Ship the instrument in the original factory packaging materials, if they are
available. If not, use similar packaging to properly protect the instrument.
Return the instrument to the nearest HP sales and service office. A list of sales and
service offices follows on the next page.
To Next Page
Loading...
