9-16
Specifications
HP ESG Series Signal Generators Specifications
General
Accessories
Power Requirements: 90 to 132 V; 50, 60, or 400 Hz; 250 W maximum
198 to 254 V; 50 or 60 Hz; 250 W maximum
Operating Temperature Range: 0 to 55° C
Storage Temperature Range: −40 to +71 ° C
Shock and Vibration: Meets MIL STD 28800E Type III, Class 3
Leakage: Conducted and radiated interference meets MIL STD 461B RE02
Part 2 and CISPR 11. Leakage is typically < 1 µV (nominally
0.1 µV with a 2-turn loop) at ≤ 1000 MHz, measured with a
resonant dipole antenna one inch from any surface with output
level < 0 dBm (all inputs/outputs properly terminated).
Storage Registers: Up to 100 storage registers with sequence and register
number displayed. Up to 10 sequences available.
Weight: < 12.7 kg (28 lb.) net, < 21 kg (46 lb.) shipping
Dimensions: 133 mm H x 426 mm W x 432 mm D
(5.25 in. H x 16.8 in. W x 17 in. D)
Transit Case, HP Part Number 9211-1296
HP 83300A Remote Interface
To Next Page
Loading...
