HP ESG Series - Pulse; Ramp

5-81
Hardkey and Softkey Reference
LF Out
Pulse
This softkey lets you specify pulse as the waveform for the LF output signal. The
signal shape can only be specified when you have selected the internal source to
operate as a function generator. Use the
LF Out Period and LF Out Width softkeys
to define the pulse shape.
This softkey is only active when you have selected the internal source to operate
as a function generator.
Softkey Location: Press
LF Out, LF Out Source, Function Generator,
LF Out Waveform, More 1 of 2, Pulse
Status after Normal Preset: LF Out Waveform is set to Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe PULSe
[:SOURce]:LFOutput:FUNCtion:SHAPe?
Ramp
This softkey lets you specify ramp as the waveform for the LF output signal.
This softkey is only active when you have selected the internal source to operate
as a function generator.
Softkey Location: Press
LF Out, LF Out Source, Function Generator,
LF Out Waveform, Ramp
Status after Normal Preset: LF Out Waveform is set to Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe RAMP
[:SOURce]:LFOutput:FUNCtion:SHAPe?