9-13
Specifications
HP ESG Series Signal Generators Specifications
Internal Modulation Source
Provides FM, ΦM, and AM modulation signals and LF Out.
Level Accuracy (relative to CW)
1
: ±0.5 dB, typical
1. With ALC off, specifications apply after the execution of power search. With
ALC on, specifications apply for repetition rates < 10 kHz and pulse widths
≥5 µs.
External Input: Ext 2
Input Voltage:
RF On: > +0.5 V, nominal
RF Off: < +0.5 V, nominal
Input Impedance: 50Ω, nominal
Internal Pulse Generator:
Squarewave Rate: 0.1 Hz to 50 kHz
Period: 16 µs to 30s
Width: 8 µs to 30s
Resolution: 4 µs
Waveforms: Sine, Square, Ramp, Triangle, and Noise
Rate Range:
Sine: 0.1 Hz to 50 kHz
Square, Ramp, Triangle: 0.1 Hz to 10 kHz
To Next Page
Loading...
