EasyManua.ls Logo

HP 8510w - Page 36

HP 8510w
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP Fingerprint Sensor
Mobile Voltage
Operation
3.0V–3.6V Single Supply
Operating Temperature
32° – 158°F (0° – 70°C)
Current Consumption @
3.3V
Less than 70 mA peak imaging and scrolling
Less than 25 mA hardware finger detection
Advanced Power Management
High-Rate Image Capture
Up to 240 image frames /sec
ESD Resistance
IEC 61000-4-2 Level 4 (±15KV)
Detection Matrix
192 x 16 Pixels
9.7mm x 0.81mm
500 ppi High-Resolution Images
Audio
Hardware
Implementation
ADI1981HD High Definition CODEC
Volume Controls
Volume up, volume down, and mute
Full Duplex
Yes
Sound Blaster Pro
compatible
Yes
Microphone In
Stereo
Headphone/Line Out
Stereo
Integrated Microphone
Yes
Audio Output Quality
Frequency Response
20 Hz – 20 kHz
Signal to Noise Ratio
>85 dB
Total Harmonic Distortion
0.01%
Noise Floor
-110 dB
Play/Record Sampling
Rate
(s)
8 kHZ – 48kHz
DAC
16, 20 or 24-bit
ADC
16 or 20-bit
Integrated Stereo
Speakers
Power Rating
2 Watts
Impedance
4 Ohms
Communications
QuickSpecs
HP Compaq 8510w Mobile Workstation
Technical Specifications
DA - 12727 North America — Version 15 — July 14, 2008
Page 36

Other manuals for HP 8510w

Related product manuals