HP 8642B Operation And Calibration Manual

Operation
Model 8642A/B
Save/Recall (cont'd)
3-158
Example
First set the Signal Generator's frequency to 10 MHz. and set the output amplitude to
-10 dBm:
( FREQ ) rn OD (MHZ V I (AMPTD ) 0 CD OD [GHZ DBM )
Save this instrument state in register 05.
First:
LOCAL
(keys)
..
(program
codes)
Display
~RVE
OR
DATA
[ SAVE)
sv
I I P -- I7f
'-' -.....,
Tin
.u , I
Note the UP = 0 I and DN = 00 prompts. These show the current register num bel' of
(DN = 00) and the next register number (01)
When you enter the register number, the spaces next to the word liSA VEil will be filled.
SelectCQ] m
When the register number IS entered, the display returns t.o show the current
instrument settings.
Now set the
output frequency to 500 MHz.:
CFREQ] m OD OD (MHZ V )
Save this instrument state 111 the next available register (register 06).
DATA
LOCAL
(kevs)
80
..
(program
SVUP
codes)
After the CD key is pressed, the display returns to show the current instrument
settings.

HP 8642B Specifications

General

Brand	HP
Model	8642B
Category	Inverter
Language	English