HP 8656B User Manual

specifications
SPECIFICATIONS describe the instruments warranted
performance and apply after a 30 minute warm-up. AH
SPECIFICATIONS are valid over the signal generator's entire
Operating/Environmental Range unless otherwise noted.
SUPPLEMENTAL CHARACTERISTICS (shown in italics) are
intended to provide additional information useful in applying
the instrument by giving typical (expeded), but not warranted
performance.
FREQUENCY
Range (10-digit LED display ):
100 kHz to 2060 MHz.
Resolution: 1 Hz.
Switching Speed (to be within 1 dB of level and
within
100 Hz of carrier frequency):
<35 rns.',W1 (30 ms typical at 25"CI
Accuracy and Stability: Same as timebase used.
SUPPLEMENTAL CHARACTERISTICS
Frequency Underrange: To 10 kHz with
uncalibrated output and modulation.
Phase Ofiet: Output sigd phase is adjustable in 1
degree increments.
Timbase Charaetehsf ies:
SPECTRAL PURITY
Spurious Signals I<+7 dBm output levels):'-pgl
@ng Rate
Temperature
(0-55°C)
Line Voltage
Freqm~
Timebase
Reference
Signal
(Rear Pa~ll
External
Referem
input
(Rear Panel)
%?ppm/year
f 10 ppm
-
50 MHz
Type ofspuriow
Harmonic
Sub-harmonic
Residual FM in Hz rms {in CW mode):
I I I
Nonhariionic Spurious:
Option 001
I.0x1041dayafter45
dQVs
7 x104
2x 109(+5%,-10%)
I0 MHz
Carrier Frequency
0.1 to 130
130 to 260
260 h~ 520
520
to 1030
1030
~JJ 2060
Available at a level of g.15 Vrms into
50 R (Output of 10,5, or 1 MHz is
selectable via internal jumper). If an
external reference is used, output will
be the same frequency.
Accepts any IO,5, or I MHz (?0.0.002%1
frequency standard at a hue1 *.I5 Vrml
into 50 9.
Preq-cy (-1
0.1 to 130 MHz
130to260MHz
260 to 520 MHz
520 to 1040 MHz
1040 ta 2060 MHz
Poat
De&&ion
Bandwidth
0.3 - 3 kHz
0.05 - 15 kHz
0.1-1030
<- 30 dBc
None
SUPPLEMENTAL CHARACTERISTICS
Typical SSB Phase Noise at 500 MHz
carriermmet
>5 kHz mptcal)
<-
63 dBc
<- 75 dBc
<- 66 ~Bc
<- 63 dBc
<- 57 dBc
Fkeqnency Range (MHz)
1030-1800
c- 25 dBc
<- 40 dBc
w2 MHz
c- GO dBc
<- 60 dBc
<- 60 dBc
<- 60 dBc
<- 54 d3c
0.1-
130
<4Hz
<6Hz
Typical Remidual FM:
-3
1800-2060
<- 25 dBc
<- 36 dBc
0.3 - 3 kHz
0.3 - 3 kHz (CCI'lT)
0.05 - 15 kHz
130-
a60
<1 Hz
<1.5Hz
Residual AM (50 Hz to 15 kHz post-detection
noise bandwidth, in CW mode): <0.04% AM.
9SB Phase Noise (in CW Mode):
I I 1
<2 Hz
4.25 Hz
<3Hz
260-
620
<2 Hz
<3Hz
4.5 Hz
425 Hz
<1 Hz
5a0-
1040
<3 Hz
<4Hz
1040-
2060
-
<6 Hz
<8Hz
<0.5 HZ
425 Hz
<1 Hz
<1 Hz
~0.5 Hz
~1.5Hz
<2 HZ
d.0 Hz
<3Hz

HP 8656B Specifications

General

Brand	HP
Model	8656B
Category	Portable Generator
Language	English