HP BL860c - 1 Planning the Installation; Support Information

1. Execute the following command to set the maximum thread value on the HP SMH. smhconfig
max-threads=value where, max-threads value range is 64-512.
2. Execute the following command to restart the HP SMH service smhconfig -r
1. As a precautionary measure, copy the existing smhpd.xml file into a different directory.
2. Manually add the tag:
a. Open the smhpd.xml in the \hp\hpsmh\conf directory on the boot drive with a text editor.
b. Add the following line between the <system-management-homepage> and
</system-management-homepage> tags:
<max-threads>value</max-threads>
Note: The value can be 64-512 on Windows systems. The default value for Windows systems
is 250.
c. Save the file.
3. Restart the HP SMH service.
HP SMH 6.2 release for Windows and Linux 13