HP BL860c - 3 Installing the OS and Updating the Server; Using HP Smart Setup to Install the OS

Table 2-1 Installation and Configuration Input (continued)
ValueInput Description
Node 2:Node 1:WWID, slot number, and bus
of each FCA
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 4:Node 3:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 6:Node 5:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 8:Node 7:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Cluster name
IP address:
Subnet mask:
Cluster IP address and
subnet mask
Default gateway IP address
WINS server IP address
DNS IP address
NOTE: For security reasons, do not record the password here.
Local system administrator
password (used during OS
installation)
Domain name
NOTE: For security reasons, do not record the password here.
Domain administrator user
name and password (used
during OS installation for
machine to join domain)
NOTE: For security reasons, do not record the password here.
Domain account user name
and password for cluster
service (this account has
special privileges on each
cluster node)
Creating and Configuring the Cluster
The following sections describe the steps you follow to create and configure a cluster.
Creating and Configuring the Cluster 25