Intermediate transfer belt (ITB)
1. Remove the following components:
●
Right cover. See
Right cover on page 103.
●
Left cover. See
Left cover on page 105.
●
Rear-side cover. See
Rear-side cover on page 115.
2. Open the front door and pull out the print-cartridge drawer.
Figure 6-48 Remove the ITB (1 of 9)
3. Release one tab (callout 1).
Figure 6-49 Remove the ITB (2 of 9)
1
124 Chapter 6 Removal and replacement ENWW