Physical specifications
Height Depth Width Weight
254 mm (10.0 inches) 452 mm (17.8 inches) 399 mm (15.7 inches) 17.6 kg (38.9 lb)
Electrical specifications
WARNING! Power requirements are based on the country/region where the printer is sold. Do not
convert operating voltages. This may damage the printer and void the product warranty.
Item 110-volt models 220-volt models
Power requirements 100 to 127 V (+/-10%)
50 to 60 Hz (+/-2 Hz)
220 to 240 V (+/-10%)
50 to 60 Hz (+/-2 Hz)
Minimum recommended circuit capacity 4.5 A 2.5 A
Power consumption and acoustic emissions
See www.hp.com/go/cljcp1210/regulatory or www.hp.com/go/cljcp1510/regulatory for current
information.
Operating-environment specifications
Environment Recommended Allowed
Temperature 17° to 25°C (62.6° to 77°F) 15° to 30°C (59° to 86°F)
Humidity 20% to 60% relative humidity (RH) 10% to 80% RH
Altitude Not applicable 0 to 3048 m (0 to 10,000 ft)
NOTE: These values are based on preliminary data. See www.hp.com/support/ljcp1210series or
www.hp.com/support/ljcp1510series for current information.
Skew specifications
The product has the following skew specifications:
●
Print engine (cut-sheet paper): less than 1.5 mm (0.06 inches) over a 260-mm (10.24-inch) length
●
Print engine (envelopes): less than 3.3 mm (0.13 inches) over a 220-mm (8.66-inch) length
248 Appendix B Specifications ENWW
To Next Page
Loading...