Control-panel walkaround (HP Color LaserJet CP1210
Series Printer)
The product has the following lights and buttons on the control panel:
3
2
1
7
6
4
5
1 Toner lights: Indicate that a print cartridge needs to be replaced. When a print cartridge is out of the product, the
corresponding light blinks.
2 Ready light: Indicates that the product is ready to print.
3 Resume button and light: Indicates that a job is paused. Press this button to continue printing the current job.
4 Attention light: Indicates that a door is open or other errors exist.
5 Paper out light: Indicates that the product is out of paper.
6 Cancel button: To cancel the print job that is currently printing, press the Cancel button.
7 Jam light: Indicates that there is a jam in the product.
NOTE: See Status-light patterns (HP Color LaserJet CP1210 Series Printer only) on page 172 for
descriptions of the light patterns.
18 Chapter 2 Control panel ENWW
To Next Page
Loading...