Load paper and print media
1. Pull the tray out of the product and remove any paper.
2. Slide open the paper length and width guides.
●
To load Legal-size paper, extend the tray by pressing and holding the extension tab while
pulling the front of the tray toward you.
NOTE: When it is loaded with Legal-size paper, the tray extends from the front of the product
approximately 51 mm (2 inches).
3. Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length
and width guides so that they are against the stack of paper.
ENWW Load paper and print media 33
To Next Page
Loading...