Optimize
●
Background Toner
Select On to reduce background printing on glossy media.
●
Extra Drum Cleaning
Select On to reduce the residue left by high-acid media that can cause print-quality problems.
●
Drum Banding
Select On to reduce the occurrence of sharp image-quality defect lines at the photosensitive drum
by inducing extra drum pre-rotations and by jogging the drums slightly after each job (the jogging
motion is slightly audible).
●
Transfer Belt Cleaning
Increases the effectiveness of the transfer belt cleaning process. Use this option if a previous
heavy-coverage print job is leaving a faint image (ghosting) on subsequently printed pages.
●
Transfer Belt Cleaning Voltage
Allows fine adjustment of the transfer belt cleaning roller and brush voltage.
●
Transfer Belt Voltage-Y
Allows for fine adjustment of the yellow print cartridge to Intermediate Transfer Belt (ITB) transfer
voltage.
●
Transfer Belt Voltage-M
Allows for fine adjustment of the magenta print cartridge to Intermediate Transfer Belt (ITB) transfer
voltage.
●
Transfer Belt Voltage-C
Allows for fine adjustment of the cyan print cartridge to Intermediate Transfer Belt (ITB) transfer
voltage.
●
Transfer Belt Voltage-K
Allows for fine adjustment of the black print cartridge to Intermediate Transfer Belt (ITB) transfer
voltage.
System Setup
Use these system settings to configure miscellaneous print settings. These settings are not available
on the control panel.
NOTE: You must click Apply before your changes take effect.
Service
Click Restore to return the product settings to the factory default settings.
46 Chapter 4 Manage and maintain ENWW
To Next Page
Loading...