HP Color LaserJet CP1210 Series; Color LaserJet CP1510 Series - HP ToolboxFX for CP1510 Series

HP ToolboxFX (HP Color LaserJet CP1510 Series Printer
only)
HP ToolboxFX is a program that you can use to complete the following tasks:
●
Check the product status.
●
Configure the product settings.
●
Configure pop-up-alert messages.
●
View troubleshooting information.
●
View online documentation.
You can view HP ToolboxFX when the product is directly connected to your computer or is connected
to the network. You must perform a recommended software installation to use HP ToolboxFX.
NOTE: HP ToolboxFX is not supported for Windows 2000, Windows Server 2003, or Macintosh
operating systems. To use HP ToolboxFX, you must have the TCP/IP protocol installed on your
computer.
You do not need to have Internet access to open and use HP ToolboxFX.
View HP ToolboxFX
Open HP ToolboxFX in one of these ways:
●
In the Windows system tray, double-click the HP ToolboxFX icon (
).
●
On the Windows Start menu, click Programs (or All Programs in Windows XP and Vista), click
HP, click HP Color LaserJet CP1510, and then click HP ToolboxFX.
HP ToolboxFX contains the following folders:
●
Status on page 49
●
Alerts on page 50
●
Product information on page 50
●
Help on page 50
●
Device Settings on page 52
●
Network Settings on page 57
48 Chapter 4 Manage and maintain ENWW