Embedded Web server sections
The table below describes the basic screens of the embedded Web server.
Tab or section Description
Status tab
Provides product, status, and
configuration information.
●
Device Status: Shows the product status and shows the life remaining of
HP supplies, with 0% indicating that a supply has reached the end of its life.
●
Supplies Status: Shows the life remaining of HP supplies, with 0% indicating that a
supply has reached the end of its life. This page also provides supplies part numbers.
●
Device Configuration: Shows the information found on the product configuration
page.
●
Network Summary: Shows the information found on the product network
configuration page.
●
Print Info Pages: Allows you to print the PCL, PCL6, PS Font Lists, and the supplies
status page that the product generates.
●
Color Usage Job Log: Shows user color print jobs on a job-by-job basis.
●
Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
Settings tab
Provides the ability to configure the
product from your computer.
●
Device Information: Allows you to name the product and assign an asset number
to it. Enter the name for the primary contact who will receive information about the
product.
●
Paper Handling: Allows you to change the paper-handling defaults for the product.
●
Printing: Allows you to change the printing defaults for the product.
●
PostScript: Allows you to change the PostScript defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product,
including calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the media
types that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
NOTE: The Settings tab can be password-protected. If this product is on a network,
always consult with the printer administrator before changing settings on this tab.
Networking tab Network administrators can use this tab to control network-related settings for the product
when it is connected to an IP-based network. This tab does not appear if the product is
directly connected to a computer.
ENWW HP Embedded Web Server (HP Color LaserJet CP1510 Series Printer only) 59
To Next Page
Loading...