The Print Data Optimization feature can be changed from Auto to Optimize for Raster or Optimize
for Text and Vector.
Selecting Optimize for Raster causes the driver to always use the Raster path when printing; and,
selecting Optimize or Text and Vector causes the driver to always use the PDL path.
Layout Options
The Layout Options setting offers different ways of setting up the Page Order.
●
Front to Back. Prints the document so that page 1 prints first.
●
Back to Front. Prints the document so that page 1 prints last; useful to achieve output in the correct
order when printing to a face-up page output bin.
NOTE: The page-ordering operation works on whole sheets of paper rather than on individual logical
pages. Accordingly, if by setting Pages per Sheet (on the Finishing tab) to be greater than one, the
ordering of logical pages on a physical sheet of paper does not change.
176 Chapter 4 HP PCL 6, PS emulation drivers, and UPD for Windows ENWW
HP PCL 6, PS emulation
drivers, and UPD for
Windows
To Next Page
Loading...