4. The main Installer dialog appears. Click Install and then follow the onscreen instructions to
complete the software installation.
NOTE: When you are installing the printing-system software, be patient. The installer must
perform an initial search of the computer for up to 1 minute. During this time the installer might
appear to be stalled.
5. When software installation is complete, click Quit.
6. Continue with the steps for setting up a printer.
The software program that you use to finish setting up the printer varies by operating system. The
following table shows the print setup tools that are available.
Table 5-4 Adding a printer in Macintosh operating systems
Operating System Print Center Printer Setup Utility Print & Fax
Mac OS X V10.2.8 x
Mac OS X V10.3 x x
Mac OS X V10.4 x x
Mac OS X V10.5 x
Detailed Mac OS X installation
Topics:
●
Main Install dialog sequence
Main Install dialog sequence
This section provides information about the Macintosh installation dialog-box sequence for the Easy
Install (the typical installation option).
NOTE: If you are installing the printer using a network connection, you can connect the printer to the
network before installing the software, but if you are installing the printer using a USB connection, install
the software before connecting the USB cable.
1. Insert the HP Color LaserJet CP1510 Series printing-system software CD in the CD-ROM drive.
ENWW Macintosh installation instructions 245
Macintosh
To Next Page
Loading...