General Security
The following illustration and table describe how to use the General Security screen.
Figure 3-8 General Security screen
Table 3-6 General Security
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web
Server.
2 Set Password Set an administrator password to control who can gain access to the EWS
Settings, Digital Sending, and Networking tabs. After the password has
been set, users are prompted to type a password when they click the Log
In link. For more information, see
Login and logoff.
To clear a password, remove the characters from the New Password field,
leave the Verify Password field empty, and click the Apply button.
3 Display Color Usage Job Log
on Information Tab
Select to display the Color Usage Job Log page on the Information tab.
4 Display Print Page on
Information Tab
Select to display the Print page on the Information tab.
ENWW General Security 39
Settings
To Next Page
Loading...