HP Color LaserJet Pro M176

3
7. Mobile and wireless printing (M177fw wireless model only)
8. Set up HP ePrint via email
7.1
Connect the device to the wireless network
To print from a phone or tablet, connect the device to the same wireless
network as the printer.
Apple iOS devices (AirPrint)
Open the item to print, and select the Action icon. Select Print, select the
printer, and then select Print.
Newer Android devices (4.4 or newer)
Open the item to print, and select the Menu button. Select Print, select the
printer, and select Print.
Some devices require downloading the HP Print Service plugin app from the
Google Play store.
Older Android Devices (4.3 or older)
Download the HP ePrint app from the Google Play store.
Windows Phone
Download the HP AiO Remote app from the Windows Store.
Learn more about mobile printing
To learn more about other mobile printing options,
including additional ePrint solutions, scan the QR code,
or see the “Mobile printing” section of the User Guide.
7.2
HP Wireless Direct
HP Wireless Direct enables close-proximity printing from a wireless mobile
device directly to an HP Wireless Direct-enabled printer without requiring a
connection to a network or the Internet.
Enable HP Wireless Direct
1. From the Home screen on the printer control panel, touch the Wireless
button.
2. Open the following menus:
• Wireless Menu
• Wireless Direct Settings
• On/O
3. Touch the On menu item. The printer saves the setting and then returns
the control panel to the Wireless Direct Settings menu.
For more information on wireless printing and wireless setup, go to
www.hp.com/go/wirelessprinting.
Use HP ePrint via email to print documents by sending them as an email attachment
to the printer’s email address from any email enabled device, even from devices that
are not on the same network.
To use HP ePrint via email, the printer must meet these requirements:
• The printer must be connected to a wired or wireless network and have
Internet access.
• HP Web Services must be enabled on the printer, and the printer must be
registered with HP Connected.
Enable HP Web Services
LCD control panel
1. On the printer control panel, press the Setup button, and open the following
menus:
• Network Setup
• Show IP Address
2. Open a Web browser, and enter the IP address in the address bar to open the
HP Embedded Web Server (EWS). Click the HP Web Services tab, and then click
Enable. HP Web Services is now enabled, and the printer prints an information
page. The information page contains the printer code to register the HP printer
at HP Connected.
3. Go to www.hpconnected.com to create an HP ePrint account and complete the
setup process.
Touchscreen control panel
1. From the Home screen on the printer control panel, touch the Web Services
button.
2. Touch the Enable Web Services button. The printer enables Web Services, and
then prints an information page. The information page contains a printer code
necessary to register the HP printer at HP Connected.
3. Go to www.hpconnected.com to create an HP ePrint account and complete the
setup process.