Connecting a 1394 device
CAUTION: To prevent damage to a 1394 port connector, use minimal force to connect a 1394
device.
To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You
will hear a sound when the device has been detected.
Stopping a 1394 device
CAUTION: To prevent loss of information or an unresponsive system, stop the 1394 device
before removing it.
CAUTION: To prevent damage to a 1394 connector, do not pull on the cable to disconnect the
1394 device.
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
(< or <<) in the notification area.
2. Click the name of the device in the list.
NOTE: If the device is not displayed, you do not have to stop the device before you remove
it.
3. Click Stop, and then click OK.
ENWW Connecting a 1394 device 5
To Next Page
Loading...
