HP Compaq 8100 Elite Series User Manual

The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I – Drive Failure Prediction
SMART II – Off-Line Data Collection
SMART III – Off-Line Read Scanning with
Defect Reallocation
SMART IV – End-to-End CRC for hard drives
Allows hard drives to monitor their own health and to raise flags if imminent failures were
predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
Detects errors in Read/Write buffers on HDD cache RAM
Interface in F10 setup provides confirmation of SMART IV support.
QuickSpecs
HP Compaq 8100 Elite Series
Technical Specifications
DA - 13524 Worldwide — Version 27 — September 30, 2011 Page 22

HP Compaq 8100 Elite Series Specifications

General

Processor	Intel Core i5 or i7
Chipset	Intel Q57 Express
Memory	Up to 16 GB DDR3
Network	Integrated Intel 82578DM Gigabit Network Connection
Audio	Integrated High Definition Audio with Realtek ALC261 codec
Storage	250GB to 1TB HDD or 128GB SSD
Graphics	Integrated Intel HD Graphics or optional discrete graphics
Optical Drive	DVD-ROM
Operating System	Windows 7 Professional
Form Factor	Small Form Factor
USB Ports	10 USB 2.0 ports
Ports	VGA, DisplayPort
Power Supply	240W to 320W depending on form factor
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI