HP Compaq 8100 Elite Series User Manual

80-GB 2.5” Solid State Drive
Capacity 80-GB
Interface Serial ATA (SATA)
Architecture Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Dimensions (W x H x D) 2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm
Weight 0.18 lb/80 g
Bandwidth Performance
Sustained Sequential Read: Up to 250 MB/s
Sustained Sequential Write: Up to 70 MB/s
Random Read: Up to 35K IOPs
Random Write: Up to 6.6K IOPs
Latency Read: 65-ms
Write: 85-ms
Power
DC power requirement 5 VDC 5%-100 mV ripple p-p
Total power consumption 0.15W (active); 0.075W (idle)
Useful Drive Life 35TB written, up to 20GB/day for 5 years
Environmental
(all conditions, non-condensing)
Operating Temperature : 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Maximum Wet Bulb
Temperature (operating)
84° F (29° C)
Shock: 1,500 G/0.5-ms
Note:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
QuickSpecs
HP Compaq 8100 Elite Series
Technical Specifications - Hard Drives
DA - 13524 Worldwide — Version 27 — September 30, 2011 Page 45

HP Compaq 8100 Elite Series Specifications

General

Processor	Intel Core i5 or i7
Chipset	Intel Q57 Express
Memory	Up to 16 GB DDR3
Network	Integrated Intel 82578DM Gigabit Network Connection
Audio	Integrated High Definition Audio with Realtek ALC261 codec
Storage	250GB to 1TB HDD or 128GB SSD
Graphics	Integrated Intel HD Graphics or optional discrete graphics
Optical Drive	DVD-ROM
Operating System	Windows 7 Professional
Form Factor	Small Form Factor
USB Ports	10 USB 2.0 ports
Ports	VGA, DisplayPort
Power Supply	240W to 320W depending on form factor
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI