HP Compaq 8200 User Manual

USB Interface
USB 2.0 High-speed interface
NOTE:
Requires the USB cable to be connected to the internal USB 2.0 port or a USB 2.0 PCI card.
Advance protocol support
Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
Supports MS 4-bit parallel transfer mode
Supports MS-PRO 4-bit parallel transfer mode
Supports MS PRO-HG Duo 4-bit parallel transfer mode
Supports SD 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 2.0)
Supports high-speed 52Mhz MultiMediaCard 8-bit card (version 4.2)
Supports CF v4.0 with PIO mode 6 and Ultra DMA mode
Supported media type
CompactFlash Type I
CompactFlash Type II
Microdrive
MultiMediaCard
Reduced Size MultiMediaCard (RS MultiMediaCard)
MultiMediaCard 4.2 (MultiMediaCard Plus, including MultiMediaCard Plus HC)
Reduced Size MultiMediaCard 4.2 (MultiMediaCard Mobile, including MultiMediaCard Mobile HC)
Secure Digital Card (SD)
Secure Digital High Capacity (SDHC)
miniSD
miniSD High Capacity
Micro SD (T-Flash)
Micro SD HC
Memory Stick
Memory Stick Select
Memory Stick Duo (MS Duo)
Memory Stick PRO (MS PRO)
Memory Stick PRO Duo (MS PRO Duo)
Memory Stick PRO-HG Duo
QuickSpecs
HP Compaq 8200 Elite Series
Technical Specifications - Removable Storage
DA - 13879 North America — Version 36 — August 15, 2013 Page 67

HP Compaq 8200 Specifications

General

Power Supply	240W (SFF), 320W (MT)
Graphics	Intel HD Graphics
Operating System	Windows 7 Professional
Processors	Intel Core i3, i5, or i7
Memory	Four DIMM slots; Up to 32 GB DDR3 SDRAM
Optical Drive	DVD-ROM, DVD-RW
Audio	High Definition Audio
Network	Integrated Gigabit Ethernet
Ports	USB 2.0, DisplayPort, VGA, serial, parallel, PS/2, audio in/out
Form Factor	Small Form Factor
Processor	Intel Core i3, i5, or i7
Storage	250GB