HP Compaq Business Desktop dx2000 - Intel Pro 1000 MT NIC Specifications

Other PC'99 compliant, PCI version 2.2, WHQL approved; support for ACPI
revision 1.1
DC131C
Intel Pro 1000 MT NIC Connector RJ-45
Controller Intel 82540EM Gigabit Controller
Memory Integrated 96Kb frame buffer memory
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and
802.3u compliant, 802.3x flow control
Bus architecture PCI 2.2
Data path width 32-bit, 33/66 MHz bus interface
Data transfer mode Bus-master DMA
Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS
Mark for European Union
Power requirement 1.48 watts @ +3.3V AUX supply with 5V tolerance
Boot ROM support Yes
Network transfer rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Environmental Operating temperature 32° to 131°F (0° to 55° C)
Operating humidity 85% at 131° F (55° C)
Dimensions 6.4 x 4.8 x 0.8 inches (16.3 x 12.1 x 1.9 cm)
Management
capabilities
ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
QuickSpecs
HP Compaq Business Desktop dx2000 microtower
Technical Specifications - Communications
DA - 11851 North America — Version 37 — March 21, 2007 Page 21