Removing the RJ11/1394 Connector Module
(Authorized Service Providers Only)
Note
The following RJ11/1394 connector module removal instructions apply only to
HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models.
Required Equipment
• Small flat-blade screwdriver.
Removal Procedure
1.
2.
Unplug the AC adapter, if present, and remove the battery.
Remove these additional assemblies:
• Hard disk drive (page 2-9).
• Keyboard cover (page 2-12).
• Keyboard (page 2-16).
• Switchboard PCA (page 2-18).
• Display assembly (page 2-23).
• Top case (page 2-26).
• Heat sink (page 2-40).
2-48 Removal and Replacement Service Manual
To Next Page
Loading...
