Connecting the Monitor Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Remove the cable management clip from the pedestal by pulling outward on the two sides of the
clip (1) then lifting the clip off the pedestal (2).
Figure 2-3 Removing the Cable Management Clip
3. Connect one end of an Ethernet cable to the RJ-45 (network) jack on the monitor and the other
end to an RJ-45 wall jack or router.
Figure 2-4 Connecting the Ethernet Cable
Connecting the Monitor Cables 5
To Next Page
Loading...
