9. If it is necessary to replace the wireless antenna transceivers and cables, detach the cables from
the adhesive that secures them to the display enclosure, and then remove the cables.
The wireless antenna transceivers and cables for all 8.9-inch panels are available in the Display
Cable Kit, spare part number 504597-001 (with WLAN) or 504598-001 (with WWAN).
The wireless antenna transceivers and cables for 10.1-inch panels (Compaq Mini 700 only) are
available in the Display Cable Kit, spare part number 515208-001 (with WLAN) or 515209-001 (with
WWAN).
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 69
To Next Page
Loading...
