System Configuration menu
Select To do this
Language Support Change the Setup Utility language.
Processor C4 State Enable/disable the processor C4 sleep state.
Boot Options Set the following boot options:
●
f10 and f12 Delay (sec.)—Set the delay for the f10 and f12 functions of the
Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●
Internal Network Adapter boot—Enable/disable boot from Internal Network
Adapter.
●
Boot Order—Set the boot order for:
◦
Internal hard drive (select models only)
◦
USB Floppy
◦
USB CD/DVD ROM Drive
◦
USB Diskette on Key
◦
USB Hard drive
◦
USB Card Reader
◦
Network adapter
Diagnostics menu
Select To do this
Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive.
Memory Test Run a diagnostic test on the system memory.
Setup Utility menus 73
To Next Page
Loading...
