Creating Disc Labels on Your Notebook Using LightScribe
9
Using Sonic Express Labeler to create a
LightScribe label
1. Click Start, All Programs, Sonic RecordNow!, and then
click Express Labeler.
✎
You can also open the Express Labeler from within
RecordNow! by clicking Label Disc.
2. Make sure that Disc Label is selected in Step 1: Select
Project.
3. Click Text and then enter text for the Title and Subtitle.
4. For each line of content description, click New and enter text
for the information you want to include, and then click OK.
5. Select a label template by clicking Layout and choosing a
layout.
6. If desired, select a background by clicking Background.
Select one of the provided backgrounds or click More to find
one of your own images to use as a background.
✎
If you use a color image, LightScribe burns it as a grayscale
(monochrome) image.
7. When you are satisfied with the appearance of your label
design, insert the LightScribe disc (label-side down) into the
disc drive tray and then click Print.
8. From the Disc Label menu, select LightScribe 12cm Disc.
9. Select a Contrast Level and then click OK to begin burning
the label. The estimated time to complete the label is
displayed, along with a progress bar. You can continue to
work on your PC while LightScribe is burning the label.
✎
A sudden bump or vibration of the computer during the
labeling process may affect the quality of the label.
To Next Page
Loading...
