To Next PageTo Next Page
Need help?Do you have a question about the HP Compaq Presario,Presario V4000 and is the answer not in the manual?
General| Model | Presario V4000 |
|---|---|
| Graphics | Intel Graphics Media Accelerator 900 |
| Wireless | 802.11b/g |
| Battery Life | Up to 3 hours |
| Display Resolution | 1280 x 800 |
| CPU | Intel Pentium M / Celeron M |
| Processor Speed | Up to 2.0 GHz |
| Chipset | Intel 915GM |
| RAM | Up to 2 GB |
| Hard Drive | 40 GB |
| Display | 15.4 inch WXGA |
| Optical Drive | DVD±RW |
| Operating System | Windows XP Home/Professional |
| Networking | 10/100 Ethernet |
| Ports | 3 USB 2.0, VGA, S-Video, Headphone, Microphone, RJ-45 |
Lists the key features and specifications of the HP Pavilion dv4000 and Compaq Presario V4000 Notebook PCs.
Provides steps to reset the computer, including clearing CMOS and setting a new password.
Details the external components on the front, right, and left sides of the computer.
Describes the ROM-based utility for system configuration and setup options.
Provides an overview of various troubleshooting flowcharts for diagnosing computer issues.
Indicates where to find the computer's serial and model numbers for ordering parts.
Shows an exploded view of major computer components for HP Pavilion dv4000 and Compaq Presario V4000.
Details subcomponents of the display assembly for HP Pavilion dv4000 models.
Provides a listing of spare part numbers in sequential order for easy reference.
Lists the necessary tools for performing removal and replacement procedures on the computer.
Explains the sensitivity of electronic components to electrostatic discharge (ESD) and how to prevent it.
Describes the necessary grounding equipment and methods for preventing static damage.
Outlines initial steps before any removal or installation, including shutting down and disconnecting power.
Provides instructions and spare part numbers for removing and replacing the computer's hard drive.
Provides instructions and spare part numbers for removing and replacing memory modules.
Details the procedure for removing the display assembly, including subcomponents.
Provides instructions for removing and replacing the system board, including component transfer.
Lists general specifications for the computer, including dimensions, weight, input power, and temperature.
Lists specifications for various hard drive capacities, including dimensions and transfer rates.
Lists hardware DMA channels and their system functions.
Outlines the system memory map, detailing memory addresses and their functions.
Shows the pin assignments for the audio-out (headphone) jack.
Details the pin assignments for Universal Serial Bus (USB) ports.
Provides pin assignments for the external monitor port.
Explains the requirements for a 3-conductor power cord set for the computer.
Outlines country-specific requirements for 3-conductor power cord sets.
Details the specifications and locations of Phillips PM2.0×5.0 screws used in the computer.
Details the specifications and locations of Phillips PM2.5×7.0 screws used in the computer.
Provides information on the disposal of mercury-containing display components and recycling resources.
