2 General Terminal Information
Logging On
When you turn on your WBT the Terminal Login dialog box shown (see Figure 2-1)
displays, unless your system administrator has configured your terminal for
automatic login with your User Name and Password. Type in your user name and
password then click the OK button.
Figure 2-1 Terminal Login Dialog Box
If your terminal has been configured for automatic login, the Connection Manager
(see Figure 2-5) is the first screen you will see after turning on your terminal. From
the connection manager press F2 to display the Terminal Properties dialog box.
Two of the properties sheets in this dialog box provide general information about
your WBT. They are the General properties sheet and the SysInfo properties
sheet. The following paragraphs discuss these properties sheets.
To Next Page
Loading...
