44 Chapter 8
Note
If any other error messages are displayed, you have
any other problems, or you can not find a solution in
this table, contact your network system administrator.
You are not able to make a network
connection using the Connection Manager.
1. Verify that the network cable is properly
connected.
2. Verify that the network cable is connected
to a hub or other network outlet.
3. Check with your network system
administrator to ensure that the WBT is set
up properly.
While connected to a server the keyboard and
the mouse freeze.
The connection to the server may be broken.
1. Turn the terminal off, then on again.
2. Attempt to make another connection.
If you can not make the connection again:
1. Verify that the network cable is properly
connected.
2. Check with your network system
administrator to ensure that you are using
the correct network cable.
Table 8-1 Troubleshooting the Terminal, Continued
Problem Solution
To Next Page
Loading...
