●
Photo. Interprets RGB color as if it were printed as a photograph using a digital mini-lab. It renders
deeper, more saturated colors differently than the Default (sRGB) mode. Use this setting for
printing photos.
NOTE: When the Photo color theme is selected, the halftone settings are changed to the
following:
●
Photo (AdobeRGB 1998). When printing digital photographs from a professional software
program that uses AdobeRGB color space rather than sRGB, it is important that you turn off the
color management in the software program and allow the printer to manage the color space.
●
None. Sets the printer to print RGB data in raw device mode. To render photographs correctly
when this option is selected, you must manage color in the program in which you are working or
in the operating system.
The following table lists the lines per inch (lpi) for the Default (sRGB), Vivid, and Photo (AdobeRGB
1998) color themes.
Table 3-3 Halftone settings (lpi) for the Default (sRGB), Vivid, and Photo (AdobeRGB 1998) color themes
Halftone setting (Color tab) ImageREt 2400 (Paper/Quality tab)
Smooth (2-bits/pixel)
Cyan
157 lines per inch (lpi)
Magenta 159 lpi
Yellow 212 lpi
Black 141 lpi
Detail (2-bits/pixel)
Cyan
190 lpi
Magenta 190 lpi
Yellow 212 lpi
Black 212 lpi
When the Photo color theme is selected, the halftone settings (lpi) are changed to the following:
Table 3-4 Halftone settings (lpi) for the Photo color theme
Halftone setting (Color tab) ImageREt 2400 (Paper/Quality tab)
Smooth (4-bits/pixel)
Cyan
190 lpi
Magenta 190 lpi
Yellow 212 lpi
Black 212 lpi
Detailed (4-bits/pixel)
Cyan
190 lpi
Magenta 190 lpi
92 Chapter 3 HP Color LaserJet CP1210 Series print driver (Host-based raster driver) ENWW
To Next Page
Loading...