Plug and Play Install (installs only the printer driver and alerts)
1. Turn on the product and the computer.
2. Verify that the product is in a “Ready” state (the green light next to the “U”-shaped symbol is lit on
the control panel).
3. Attach the USB cable to the product and the computer.
4. The Found New Hardware Wizard appears and a dialog asks Can Windows connect to the
Windows Update to search for software?. Select No, not this time, and click Next.
5. In the next dialog, select Install the software automatically (Recommended). If the HP Color
LaserJet CP1210 Series CD-ROM is not in the CD-ROM drive, insert it now. Click Next to continue
the installation automatically.
6. The Completing the Found New Hardware Wizard dialog box appears. Click Finish to complete
the installation of the printer driver.
UNINSTALLER
The uninstaller removes all of the HP printing system components.
1. From the Start menu, click HP.
2. Select the HP Color LaserJet CP1210 Series program group.
3. Click Uninstall.
4. Follow the on-screen instructions.
Or
1. Open the Microsoft Windows Control Panel.
2. Double-click Add/Remove Programs. The following items are installed by the HP Color LaserJet
CP1210 Series installer.
●
HP Color LaserJet CP1215 - or your specific model of HP Color LaserJet 1210 Series. (for
example, if you have the CP1216 you would see a listing for CP1216).
●
HP Color LaserJet 1210 Series Toolbox
●
HPSSupply (used by multiple HP products)
●
HP Customer Participation Program 9.0.
3. For each item you wish to remove, highlight it in the list and then click Change/Remove. Follow
the prompts.
IV. TECHNICAL ASSISTANCE
For customer support information, see the product user guide or the in-box support flyer. Or, call your
local authorized HP dealer.
You can also go to the following URL for online technical support: www.hp.com/support/ljcp1210series
www.hp.com/support/ljcp1210series
ENWW Windows Install Notes/Readme 107
Engineering details
To Next Page
Loading...