Device Settings
The Device Settings folder contains links to the following main pages:
●
Paper Handling. Configure the input tray or change the printer paper-handling settings, such as
default paper size and default paper type.
●
Print Quality. Change the printer calibration and optimization settings.
●
Print Density. Change the print-density settings, such as contrast, highlights, midtones, and
shadows.
●
Print Modes. Change the fuser, duplex, or toner modes for each media type.
●
Paper Types. Change the print mode settings for each media type, such as letterhead,
prepunched, or glossy paper.
●
System Setup. Change the print system settings, such as jam recovery and auto-continue.
Change the Cartridge out override setting, which sets the option to continue printing when a print
cartridge has reached the end of its useful life.
●
Setup Status Alerts. Set up the printer so that it issues pop-up alerts to your computer when
certain events occur.
●
Service. Gain access to various procedures required to maintain the printer.
●
Save / Restore Settings. Save the printer settings so you can restore them at a later date.
Figure 1-6 HP Color LaserJet CP1210 Series Toolbox — Device Settings screen
16 Chapter 1 Purpose and scope ENWW
To Next Page
Loading...