8. Click the Finish button to exit the HP Color LaserJet CP1210 Series printing-system software
installation.
NOTE: You may be prompted to restart your computer once the software installation has
completed.
Figure 2-12 Found New Hardware Wizard — Completing the Found New Hardware Wizard screen
Point and print installation for Windows
Microsoft Point and Print is a two-step driver installation process which allows network computers to
print through a print server rather than printing directly to a device. Point and Print is similar to Window
Sharing except that the printer driver is installed on a network print server rather than a client directly
connected to the device. The first step is to install a shared driver on a network print server. The second
step is to "point" to the print server from a network client so that the client can use the printer-driver.
NOTE: Point and Print is a feature of Microsoft operating systems, not of HP printer-drivers. If these
procedures are not successful, or for more information about Point and Print networking procedures,
contact Microsoft at the following Web site:
www.microsoft.com
One or more of the links above will take you outside the Hewlett-Packard website. HP does not control
and is not responsible for information outside of the HP website.
Add another HP Color LaserJet CP1210 Series printer
If the HP Color LaserJet CP1210 Series printer has been previously installed, the appearance of the
CD Browser screen changes if you click the Install Printer Software link, and the install-printer setting
ENWW Microsoft Windows general installation overview 45
Installing Windows
printing-system
com
To Next Page
Loading...