HP CP1215 - Color LaserJet Laser Printer - Color Tab Features

Paper Type Engine Speed
12ppm Mono
Colored Full
8ppm Color
12ppm Mono
Rough 3/4
6ppm Color
8ppm Mono
Heavy Rough 3/4
6ppm Color
8ppm Mono
HP Tough Paper 3/4
6ppm Color
8ppm Mono
Use Different Paper
The Use Different Paper option allows you to print books that include different media types. Use these
options to include a blank or preprinted first page or back cover, or to change the type of media in the
middle of a document.
NOTE: Use the same size of media for the entire print job. All options selected from the available Use
Different Paper options use the size selected in the Size is: drop down menu.
To enable the Use Different Paper option:
1. From the application you would like to print from, click File, click Print, and then click either
Properties or Preferences.
2. Select the Use Different Paper check box on the Paper/Quality tab.
3. Select the appropriate option (First Page, Other Pages, or Back Cover) in the dialog box.
NOTE: The Back Cover option is not available when the Booklet Layout setting is enabled on
the Finishing tab. For two-page-per-sheet (2-up) booklet printing, include a cover by selecting
different media for the first page only. The back cover setting is unavailable, because this page
would be printed in the middle of a booklet.
4. Select the appropriate tray and type of media from the Source is: and Type is: drop-down menus.
5. Click the OK button.
NOTE: When you change the type and source of the paper and covers, the settings remain configured
until you close the software program.
Table 3-1 Standard paper types and engine speed (continued)
ENWW Paper/Quality tab features 77
HP Color LaserJet
CP1210 Series Print
Driver