The following figure illustrates the location of each supply item.
Figure 4-2 Supply item locations
2
3
1
1 Toner collection unit
2 Print cartridges
3 Fuser
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
product.
●
Allow sufficient space in the front and on the right side of the product for removing supplies.
●
The product should be located on a flat, sturdy surface.
For instructions on installing supplies, see the label on each supply item or see
www.hp.com/go/
learnaboutsupplies.
82 Chapter 4 Manage and maintain the product ENWW
To Next Page
Loading...