Right-front cover
Before proceeding, remove the following components:
●
Control-panel assembly. See
Control-panel assembly on page 203.
Remove the right-front cover
NOTE: Be careful. When removing the cover, do not dislodge the power button. If the button is
dislodged, see
Reinstall the power button on page 207 to reinstall it.
1. Remove one screw (callout 1).
Figure 6-64 Remove the right-front cover (1 of 5)
1
2. Remove two screws (callout 2).
Figure 6-65 Remove the right-front cover (2 of 5)
2
ENWW External panels, covers, and doors 205
To Next Page
Loading...