3. Before you proceed, take note of the tab locations at the bottom of the cover.
Figure 6-66 Remove the right-front cover (3 of 5)
4. Pull down on the cover to release three tabs (callout 3).
TIP: It might be easier if you position the product at the edge of the work surface so that there is
a space for the cover to slide downward. Or, you might try inserting a small flat blade screwdriver
behind the cover, and carefully pry the cover away from the product as you pull down on the cover
to release the tabs.
Figure 6-67 Remove the right-front cover (4 of 5)
3
206 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...