HP CP3525dn - Color LaserJet Laser Printer - Page 428

Event log message Description Comments
●
X=15. Main drive
●
X=16. Main drive
●
X=17. Main drive scanner
●
X=18. Scanner inclination
adjustment
●
X=19. T2 roller
54.01 The humidity-environment sensor is
abnormal.
Ensure the product is in a supported
environment. If the error persists, replace
the CN1 environment sensor.
54.02 Printer error Developer failure
54.03 Printer error Density sensor failure.
54.05 Printer error
OHT sensor out of range
Media sensor out of range
Waste toner sensor failure
54.06 The DMAX density sensor is out of range. 1.
Press the Menu
button.
2. Press the down arrow
to highlight
CONFIGURE DEVICE, and then
press the OK button.
3. Press the down arrow
to highlight
PRINT QUALITY, and then press
the OK button.
4. Press the down arrow
to highlight
QUICK CALIBRATE NOW, and
then press the OK button.
54.07 Printer error Rotary motor error
54.0C.06 The engine reported a neutral calibration
error.
1.
Press the Menu
button.
2. Press the down arrow
to highlight
CONFIGURE DEVICE, and then
press the OK button.
3. Press the down arrow
to highlight
PRINT QUALITY, and then press
the OK button.
4. Press the down arrow
to highlight
CALIBRATE NEUTRALS, and
then press the OK button.
54.0D.XX
●
XX=00: Black density-
measurement abnormality
●
XX=01: Cyan density-measurement
abnormality
1.
Press the Menu
button.
2. Press the down arrow
to highlight
CONFIGURE DEVICE, and then
press the OK button.
400 Chapter 7 Solve problems ENWW