Precautions
PrecautionsPrecautions
Precautions
To prevent electric shock do not remove
screws or back cover.
There are no user-serviceable parts inside
the monitor. Refer servicing to qualified
service personnel.
DO NOT REMOVE THE TILT/SWIVEL BASE!
The input power source:
The monitor is designed to be Full Range
from AC 100V to AC 240V.
Warning:
This appliance should be grounded.
Always connect the display to a grounded,
three-prong power outlet. Use only the
factory-supplied power cord.
Do not put the monitor or other heavy objects
on the power supply cord. A damaged
power cord may cause fire or electric shock.
Do not insert objects into the monitor.
They may cause fire or failure.
Do not allow liquids to fall into the cabinet.
2
22
2
v
vv
v70s Monitor Guide
70s Monitor Guide70s Monitor Guide
70s Monitor Guide