HP D9N46A - Page 11

19.9kVA PDU D9N63A 480V 30A 3
Phase WYE
24A /phase 19944VA
@480V 3 Phase
8ft(2.4M) cord
with attached
NEMA L22-30P
6 x 20A 30 x RF203P-
HP
(LS-26)
* HP Remote Monitored PDU models D9N45A and D9N46A require an IEC 320-C19 to country specific plug inlet cord which is sold
separately.
NOTE: Please refer to the Power Cord Matrix for more information on power cords/cable part numbers, input/output descriptions.
http://www.hp.com/go/powercordmatrix .
Disclaimer: HP makes no recommendations regarding power connector manufactures. Please consult a licensed professional to
determine the best connector or receptacle for your specific needs.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Remote Monitoring PDU Family Information
DA - 14669 North America — Version 7 — May 9, 2014 Page 11