To Next PageTo Next Page
Need help?Do you have a question about the HP HPE G2 Series and is the answer not in the manual?
General| Category | Power distribution unit |
|---|---|
| Input Frequency | 50/60 Hz |
| Mounting | Rack-mountable |
| Series | G2 |
| Model | HP HPE G2 Series |
| Input Voltage | 200-240V AC |
| Output Voltage | 200-240V AC |
| Maximum Current | 16A, 24A, 32A |
| Number of Outlets | 8, 12, 24, 36 |
| Outlet Type | IEC C13, IEC C19 |
| Form Factor | 1U |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 5% to 95% non-condensing |
| Safety Certifications | UL, CE |
Critical safety precautions for PDU installation and operation.
General description of the PDU user guide content.
Describes the different types of HPE G2 Series PDUs.
Highlights key capabilities and design aspects of the PDUs.
Details the physical configurations of PDUs like 0U, 1U, 2U.
Explains how PDUs are mounted in racks.
Methods for securing power cords to outlets.
Lists necessary tools for PDU installation.
Procedures for installing vertical PDUs.
Procedures for installing 1U PDUs.
Procedures for installing 2U PDUs.
Steps for proper electrical grounding.
Steps to connect PDU to electrical power.
Accessing and using the PDU web interface.
Steps to access the PDU via web browser.
Understanding user roles and permissions.
Managing user accounts and roles.
Configuring SNMP for network management.
Accessing PDU via serial or SSH.
Using Command Line Interface for management.
Information shown on the PDU's front panel display.
How to navigate the PDU's menu system.
Interpreting the PDU's status LEDs.
Overview of the PDU's main menu structure.
Configuration options available in the setup menu.
Viewing and managing PDU alarms.
Accessing power-related information and controls.
Descriptions of available optional sensors.
Information and operation of temperature sensors.
Procedure for installing a temperature sensor.
Procedure for installing a leak detection sensor.
Procedure for installing a door sensor.
Setting up sensor parameters and alarms.
Information on how to order replacement parts.
List of spare parts for Metered PDUs.
List of spare parts for Switched PDUs.
List of spare parts for Metered & Switched PDUs.
How to contact HPE for support.
Procedures for obtaining software updates.
Comprehensive list of Command Line Interface commands.
Various methods for updating PDU firmware.
Detailed list of PDU alarm types and codes.
Guide for replacing the horizontal management module.
Guide for replacing the vertical management module.
Instructions for integrating with HPE SIM.
