HP DC5100 User Manual

2-12 www.hp.com Hardware Reference Guide
Hardware Upgrades
7. Install the expansion card by sliding the card under the slot cover
retention latch then pressing the card down into the slot on the
system board.
✎
Be sure not to scrape other components in the chassis when installing
an expansion card.
Installing an Expansion Card
8. Rotate the slot cover retention latch back in place to secure the
expansion card.
✎
When you install an expansion card, make sure the metal bracket on
the card slides into the slot on the back of the computer then press
down firmly on the card so that the whole connector seats properly in
the expansion card slot.
Ä
CAUTION: All expansion card slots on the rear of the computer must
contain either an expansion card or slot cover for proper cooling of
internal components during operation.
376293-002.book Page 12 Friday, February 18, 2005 3:02 PM

HP DC5100 Specifications

General

Processor	Intel Pentium 4 or Intel Celeron D
Memory	Up to 4 GB DDR2 SDRAM
Network	Integrated Broadcom NetXtreme Gigabit Ethernet
Operating System	Windows XP Professional
Chipset	Intel 915G Express
Graphics	Intel Graphics Media Accelerator 900
Optical Drive	DVD-ROM, CD-RW/DVD-ROM Combo, or DVD+/-RW
Ports	USB 2.0, serial, parallel, VGA, audio in/out
Audio	Integrated AC'97 audio
Expansion Slots	2 PCI, 1 PCI Express x1, 1 PCI Express x16
Form Factor	Microtower
Processor Speed	Up to 3.8 GHz
Storage	40 GB to 250 GB HDD