HP DesignJet 100 User Manual

DesignJet 100
HP Parts Reference Guide™
www.h
p
.com/
g
o/h
pp
arts
Print Mechanism Parts
Cam
115
C7791-60232 Pick cam - Located on the left-side of the print mechanism
Carriage
116
C7796-60077 Carriage assembly - Includes trialing cable
Encoder
117
C7791-60205 Encoder strip - Clear strip with position markers
118
C8108-67051 Paper motor encoder disk - Mounts on the left end of the pivot and feedroller assembly shaft
Guide
119
C7791-60202 Inner paper guide - Guides the paper through the paper path
Holder
120
C7790-60104 Encoder strip holder - Wire loop that connects to the carriage assembly that is used to hold the encoder strip
121
C7790-60124 Ink tube holder - Holds the ink tubes from the RIDS assembly
Ink Delivery System
122
C7796-60023 RIDS assembly - Transports ink from the ink supply station to the printheads
Motor
123
C7791-60143 Carriage drive motor - Drives the carriage belt
124
C8108-67038 Paper motor assembly - Powers the drive roller
125
C8108-67040 Ramp motor assembly - Used to operate paper output rollers
Pivot
126
C7796-60026 Pivot assembly - Black plastic part under platten - Supports pick roller
Platen
127
C7791-60144 Print Platen - Surface that supports paper during printing
128
C7791-60220 Bypass platen assembly
Roller Assembly
129
C7791-60200 Pick roller assembly - Picks media from the input paper tray and feeds it through the paper path
130
C7791-60201 Feed roller assembly - Includes encoder disk and paper-axis motor assembly - Feeds media under the carriage
assembly
Roller Kit
131
C7791-60230 Upper paper guide roller kit (includes 8 rollers) - Helps to guide media through paper path
Spring
132
C7790-60125 Belt tensioner spring
Starwheel
133
C7791-60128 Starwheel assembly - Provides downward pressure on media as it passes through the feed rollers
Turnaround Assembly
134
C7791-60212 Turnaround assembly - Includes belt tensioning spring
Stand Parts
Adapter
135
Q1246-60011 Base adaptor kit (includes 2)
Bin
136
Q1246-60010 Paper bin assembly
Brace
137
Q1246-60008 X-brace assembly - Connects between both legs
© 2004 Hewlett-Packard 5

HP DesignJet 100 Specifications

Print Technology

print technology	HP Thermal Inkjet
printhead nozzles	300
maximum resolution	1200 x 600 dpi

Print Speed

print speed A4 draft	11 pages per minute
print speed A1 draft	90 seconds per page
colour images speed	25 sq m/hr

Power

input voltage	100 to 240 VAC
power frequency	50/60 Hz
power consumption	65 watts maximum

Memory and System Requirements

memory	16 MB
minimum system RAM for Windows 95/98	48 MB
recommended system RAM for Windows 95/98	64 MB

Operating Environment

operating temperature range	5 to 40° C
recommended operating temperature	15 to 30° C
operating humidity range	20 to 80% RH

Dimensions and Weight

dimensions (w x d x h)	1042 x 400 x 220 mm
product weight	21 kg
maximum length of sheet media	1625 mm