HP Designjet 110plus User Manual

HP Designjet 110plus/110 plus nr printer— Quick Reference Guide
3
1. Place a single sheet of paper in the output tray, aligning it on the right of the
output tray, with the side that is to be printed on facing down. Do not stack
multiple sheets here.
2. Push the paper as far as it will go into the printer, maintaining its alignment to
the right.
3. Press the OK key (the upper right key) on the front panel.
The printer will check the alignment of the paper, and if it is misaligned, it will eject
the paper; in that case you will have to reload the paper.
How do I unload paper from the front path?
In case you want to change or remove the paper that you have loaded before
printing, for example to change the type of paper or to use a different input path:
• Press the Cancel and OK keys at the same time, to eject the paper.
How do I load paper using the front path?
QRG110plusnr.fm Page 3 Wednesday, June 16, 2004 2:26 PM

HP Designjet 110plus Specifications

General

Print Technology	Thermal Inkjet
Print Resolution	1200 x 600 DPI
Maximum Print Size	A2 (16.5 x 22 inches)
Number of Cartridges	4
Connectivity	USB, Parallel
Operating Systems Supported	Windows, Mac OS
Interface	USB, Parallel
Standard paper tray media sizes	A4, A3, A2
Ink Cartridge Configuration	Cyan, magenta, yellow, black
Media Sizes	A2, A3, A4
Ink Types	Dye-based (color), pigment-based (black)