1. Load your paper into the printer and launch the EFI Designer Edition software.
The color calibration must be performed whenever:
• A printhead is changed.
• A new combination of paper type and print mode is loaded which has not been previously
calibrated, see note.
• The environmental conditions change (for example, temperature or humidity)
• You note deterioration in the quality of prints.
Note: To check if your media type and print mode have already been calibrated:
Preferences > Printer > Calibration.
2. To start the calibration process, first, go to Preferences > Color:
• Paper name: Select the paper type that is loaded on the printer and print quality in which
you are going to print.
• Print Resolution: Select the quality in which you are going to print.
2
To Next Page
Loading...
